Installing The Screen; Cleaning The Vaporizer And The Usb-C Supercharger; Cleaning The Herb Mill And Magazin For Dosing Capsules - Vapormed Mighty+ Medic Modo De Empleo

X Clean the Screen with rinsing water or isopropyl alcohol.

6.4.3 Installing the Screen

X Arch the cleaned or new Screen.
X Insert the Screen into the Filling Chamber with the curved side facing
upwards.
X Press the lower Screen flat into the provided groove with the aid of the Filling
Chamber Tool.

6.5 Cleaning the Vaporizer and the USB-C Supercharger

NOTICE
Material damage caused by improper cleaning
Penetration of water into the Vaporizer and the USB-C Supercharger
• Do not immerse in water or other liquids.
• Do not clean with direct water or steam jet or compressed air.
X Switch off the Vaporizer.
X Disconnect the Vaporizer and USB-C Supercharger from the mains supply.
X Only clean the housing of the Vaporizer and the USB-C Supercharger dry or
at most with a damp soft cloth.

6.6 Cleaning the Herb Mill and Magazin for Dosing Capsules

NOTICE
Material damage caused by improper cleaning
Damage to the surfaces.
• Do not place the Herb Mill and Magazine for Dosing Capsules
in isopropyl alcohol.
X Clean the Herb Mill and Magazine in warm rinsing water.
6 C L E A N I N G / H Y G I E N E
78