Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
1.
Hang the garment on a clothes hanger, away from walls, furniture and any item to avoid
damage by steam.
2.
Place the steamer upright on a flat, level and stable surface.
3.
Make sure the water tank is filled.
4.
Attach a brush attachment if needed ( Using a brush attachment).
5.
Plug the steamer into a suitable mains socket. The indicator light will light up blue,
indicating that the steamer is on and heating up to the set temperature.
6.
When the indicator light turns red, the steamer is ready to use. Always wait until the
indicator light turns red before steaming.
7.
Hold the steamer upright and press the Steam button to produce steam. Release the
button to stop.
8.
Move the steamer up and down over the garment to steam out wrinkles. If the fabric is
delicate and the steamer is used without the Delicate fabrics attachment, keep a distance
of at least 5 cm between the soleplate and the fabric.
9.
Pull the sides of the garment with one hand to stretch it slightly. Use a heat protective
glove to protect your hand from steam if required.
10. To have continuous steam, hold down the Steam button and slide the Lock switch down
to lock the button. This allows you to steam garments without the need to hold down the
Steam button.
11. To stop the continuous steam, slide the Lock switch up.
12. Unplug the unit and refill the water tank when the water level is below one-third of the
tank ( Filling the water tank). If the unit makes a loud humming sound and no steam
is produced, this may indicate that the water tank is empty.
13. Once finished using the steamer, wait for 15 seconds until no steam is generated, and
then unplug the steamer from the mains socket to turn it off.
14. Clean the unit ( Cleaning and maintenance).
WARNING: Never leave the unit unattended while it is plugged into the mains
socket. Unplug the unit immediately after each use.
Using a brush attachment
•
Before attaching or removing a brush attachment, unplug the steamer and allow it to
cool down.
•
Align the desired brush attachment to the soleplate and carefully press on both sides of
the attachment until it "clicks" into place. To remove the brush attachment, gently pull
the side tabs of the attachment.
•
The Fabric brush attachment opens the weaves of heavy fabrics for better steam
penetration. Use this attachment to remove hair, dust and lint.
•
The Delicate fabrics attachment helps protect delicate fabrics from the direct heat of
the iron. Use this attachment as an ironing cloth to protect fabrics from scorching or
shine marks.
17
EN
Publicidad
