Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning and maintenance
WARNING:
• Before cleaning, always unplug the unit from the mains
socket and allow it to cool down completely.
• Never immerse the unit, power cable or plug in water
or any liquid. Never rinse them under the tap. Keep all
electrical parts dry.
• Never use solvents, chemical or abrasive cleaning agents, wire
brushes, sharp objects or scouring pads to clean the unit.
• Empty the water tank after each use. Detach the water tank,
open the lid and pour the water into a sink or bucket.
• Wipe the soleplate and exterior of the steamer with a soft cloth,
moistened with water. Dry well after cleaning.
• Remove any brush attachment from the soleplate. Clean the
brush attachments with a soft damp cloth. Allow to air dry.
• Reattach the water tank after cleaning and store the steamer
upright.
Troubleshooting
Follow this troubleshooting guide to solve common problems that you may encounter with
the unit. If the problem persists, stop using the unit and contact an authorized Service Centre
for examination or repair.
Problem
The steamer does
not heat up.
Possible Cause
• The plug is not
inserted correctly.
• No power supply.
19
Solution
• Ensure the plug is firmly inserted into
the mains socket.
• Check the power supply.
EN
Publicidad
