Publicidad
Idiomas disponibles
Idiomas disponibles
MAIN ASSEMBLY INSTALLATION
WARNING:
To avoid the risk of electrocution confirm the electrical supply has been disconnected or switched off before continuing any installation work.
Fig 12
A
A
B
housing to the main housing once
the assemblies are fully seated. The
main assembly will attach to the rear
housing assembly by the four screws
main and rear assemblies together
until the screws can be installed.
RE-INSTALLING FILTERS
IMPORTANT:
Make sure all plastic wrap is removed from filters.
Fig 16
Make sure filters are in correct
Fig 20
be visible through the lens, indicating
power light indicator will flash once
a second.
Fig 13
Carefully align the main assembly
with the rear housing assembly.
Slowly press into place until snap is
heard, and there is no gap between
should now support its own weight.
Fig 17
IMPORTANT
detection area aligns with window
Fig 14
1
Fig 15
4
Fig 18
Open front panel by pressing
latches on both sides of unit. Allow
door to open fully. Insert filters
– IMPORTANT
detection window is aligned in
LOCKING ACCESS PANEL
Fig 21
2
3
5
6
Fig 19
Close front panel by pressing
firmly until both sides latch closed
To restrict access to the control panel
and filters the unit can be locked. To
lock, insert the key provided and
5
Publicidad
