Publicidad
Idiomas disponibles
Idiomas disponibles
5....-05-MRC 528 P NEU
Overview of the Components
1
Lens
2
MIN button
3
ALARM button
4
Adapter connection
5
LED display
6
ON/OFF switch for projector
7
SNOOZE/PROJECTOR/LIGHT button
8
Swiveling projector
9
ALARM ON/OFF switch
10 TIME button
11 HOUR button
Battery Mode (not supplied)
1. Please open the battery compartment on the bottom.
2. Insert 2 1.5V AA type batteries. Match the polarities correctly (see the inside of
the battery compartment or the marking on the outside).
3. If the device is not used for a long period of time, remove the batteries to avoid
the „spilling" of battery acid.
4. Always change the battery set completely, do not change just one battery.
Warning: batteries are not to be disposed of together with domestic wastes.
Dispose of the used batteries at the relevant collection bin or at your dealer's.
Never throw batteries into the fire.
Mains Supply Operation (not supplied)
You can also operate the device via the adapter connection.
1. Insert the mains supply plug into a correctly installed 230 V, 50 Hz safety-
contact power socket.
2. Connect the projection clock with the power supply by inserting the plug of the
power supply unit into the DC 3 V socket.
3. Please ensure that the polarity is correct according to the inscription on the
device when using the power supply unit (DC 3 V).
Setting of the Clock
Hours:
Press the TIME key (10) and the HOUR key (11) simultaneously.
Minutes:
Press the TIME key (10) and the MIN key (2) simultaneously.
Setting of the Alarm
Hours:
Press the ALARM key (3) and the HOUR key (11) simultaneously.
Minutes:
Press the ALARM key (3) and the MIN key (2) simultaneously.
16.12.2003
Putting into function
15:26 Uhr
Seite 17
GB
17
Publicidad
