DeWalt DCD999 Traducido De Las Instrucciones Originales página 21

• Health hazards caused by breathing dust developed when
working in wood.
• Risk of personal injury due to flying particles.
• Risk of personal injury due to prolonged use.
SAVE THESE INSTRUCTIONS
Battery Type
These battery packs may be used:
Battery (kg)
DCB546 1.08
DCB547/G
1.46
DCB548 1.46
DCB549 2.12
DCB181 0.35
DCB182 0.61
DCB183/B/G
0.40
Refer to the battery/charger manual for more information.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
n
Visible radiation. Do not stare into light.
Date Code Position (Fig. B)
The production date code
by a 2-digit week and is extended by a 2-digit factory code.
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
components
Battery pack
1 †
Battery release button
2
Variable speed trigger
3
switch
Forward/reverse control
4
button
Torque adjustment collar
5
Keyless chuck
6
Chuck sleeve
7
Included in some packages.
†
nOTE: Check for damage to the dust extractor, parts or
accessories which may have occurred during transport.
Intended Use
These hammerdrills are designed for professional drilling,
percussion drilling and screwdriving applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These drills/drivers/hammerdrills are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
Battery
DCB184/B/G
DCB185
DCB187
DCB189
DCBP034/G
DCBP518/G
16 consists of a 4-digit year followed
Speed selector
8
Worklight
9
Worklight switch
10
Belt hook
11 †
Mounting screw
12
Bit holder
13 †
Side handle †
14
Main handle
15
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or mental
abilities; lack of experience, knowledge or skills unless they are
supervised by a person responsible for their safety. Children
should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal injury,
turn tool off and disconnect battery pack before making
(kg)
any adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
0.62
0.35
Inserting and Removing the Battery Pack from the
0.54
Tool (Fig. B)
0.54
nOTE: Make sure your battery pack
0.32
To Install the Battery Pack into the Tool Handle
0.75
1. Align the battery pack with the rails inside the tool's
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the battery release button
pack out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some D WALT battery packs include a fuel gauge, which
e
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button . A combination of the three green LED lights will
17
illuminate, designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
nOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
Belt Hook and Magnetic Bit Holder (Fig. A)
Optional Accessories

WARNING: To reduce the risk of serious personal injury,
ONLY use the tool's belt hook to hang the tool from a work
belt. DO NOT use the belt hook for tethering or securing the tool
to a person or object during use. DO NOT suspend tool overhead
or suspend objects from the belt hook.

WARNING: To reduce the risk of serious personal injury,
ensure the screw holding the belt hook is secure.

CAUTION: To reduce the risk of personal injury or
damage, DO NOT use the belt hook to hang the drill while
using as a spotlight.
IMPORTanT: When attaching or replacing the belt hook
magnetic bit holder
is provided. Be sure to securely tighten the screw.
The belt hook and magnetic bit holder can be attached to either
side of the tool using only the screw provided, to accommodate
left- or right-handed users. If the hook or magnetic bit holder is
not desired at all, it can be removed from the tool.
is fully charged.
1
2 and firmly pull the battery
13 , use only the mounting screw
EnGLIsH
or
11
12 that
21