Publicidad
Idiomas disponibles
Idiomas disponibles
General Safety Instructions
•
Read the operating instructions carefully before
putting the appliance into operation and keep the
instructions including the warranty, the receipt and, if
possible, the box with the internal packing.
•
The appliance is designed exclusively for private use
and for the envisaged purpose. This appliance is not
fi t for commercial use. Do not use it outdoors (except
if it is designed to be used outdoors). Keep it away
from sources of heat, direct sunlight, humidity (never
dip it into any liquid) and sharp edges. Do not use the
appliance with wet hands. If the appliance is humid or
wet, unplug it immediately. Do not put it in water.
•
When cleaning or putting it away, switch off the ap-
pliance and always pull out the plug from the socket
(pull on the plug, not the cable) if the appliance is not
being used and remove the attached accessories.
•
Do not operate the machine without supervision. If
you should leave the workplace, always switch the
machine off or remove the plug from the socket (pull
the plug itself, not the lead).
•
To protect children from the dangers posed by
electrical appliances, make sure that the cable is
hanging low and that children do not have access to
the appliance.
•
Check the appliance and the cable for damage on a
regular basis. Do not use the appliance if it is dama-
ged.
•
Do not try to repair the appliance on your own. Always
contact an authorized technician. To avoid the expos-
ure to danger, always have a faulty cable be replaced
only by the manufacturer, by our customer service or
by a qualifi ed person and with a cable of the same
type.
•
Use only original spare parts.
•
Pay careful attention to the following "Special Safety
Instructions".
Special safety instructions
•
Before changing the attachments, the appliance must
be disconnected from the mains!
•
Do not reach into the mixer vessel as the underlying
blade may cause injuries under certain circum-
stances!
•
Do not put hard foods such as, nutmeg or large
pieces of chocolate into the container! The blade can
be damaged!
•
The appliance is equipped with a safety switch. Do
not use the appliance in case of malfunctions or if the
safety switch has been tampered with!
•
Do not remove the lid during use.
•
The device must only be switched on after you have
inserted the seal/stopper in the hole in the lid.
•
Do not use the appliance when empty.
•
Do not carry or lift the appliance during use. Always
switch it off fi rst and pull out the plug. Carry the appli-
ance always with both hands!
•
Clean the appliance only as described in „Cleaning".
6....-05-KM 2961 PC_Inox A5 25
Overview of the Components
1 Kitchen machine, basis appliance
2 Utensil switch
3 Drive arm release
4 Mixer vessel
5 Safety cover for mixer drive
6 Mixer vessel lid with fi lling slot
7 Filling slot seal
8 Handle
9 Mixing bowl
10 Eject button
11 Drive arm
12 Cord take-up
13 Spatula
14 Whisk
15 Beater
16 Dough hook
Unpacking the appliance
•
Remove the appliance from the box and all the enc-
losed accessories.
•
Do not through the packaging away, but keep it
together with the inner packing and the warranty
documents for the whole life of the warranty.
•
Place the appliance on smooth, level and stable work
surface.
•
Do not insert the appliance plug without installing the
necessary attachments.
•
Before the device is used for the fi rst time the mixing
bowl, processor bowl, various lids and other accesso-
ries should be washed in soapy water to remove any
contamination from their production.
•
Attention: Some parts are extremely sharp! There is
the risk of being injured under certain circumstances!
Clean each single part one after the other and with
great caution!
•
Dry well all the parts after washing.
Instructions for Use
•
Make sure that the switch (2) is positioned on „0" and
that the appliance plug is not inserted when changing
the attachments. Only now can the attachments be
mounted and used.
•
Be careful to avoid injury! During operation of the
food processor bowl the safety cover (5) must be
positioned on the mixer drive. The appliance cannot
be used without the safety lid!
Operation
Positioning the Mixing Bowl
Please all parts before using for the fi rst time (see
„Cleaning").
1. Ensure that the rotary switch is in the „0" position and
that the mains lead is not in the socket.
2. Place the mixing bowl (4) on the base of the machine
so that the line on the mixing bowl is located approxi-
mately 4 cm to the left of the line on the base. Then
turn the mixing bowl (4) clockwise until the two lines
are positioned one above the other.
Mixer function
Warning! Safety switch! The machine only works when
the mixing bowl (4) is positioned on the motor housing.
25
11.03.2005, 11:36:10 Uhr
Publicidad
