Descargar Imprimir esta página

Helvex WC MIURA16 T 2P Guia De Instalacion página 2

Inodoro elongado de dos piezas sin contacto, 4,8 lpd

Publicidad

Trace the lines as indicated.
2
como se indica.
angle valve (not included)
válvula de paso (no incluida)
90°
7,8"
(20 cm)
12,0"
(30,5cm)
drain
5,98"
desagüe
(15,2 cm)
Bowl Installation / Instalación Taza
Install the wax ring (not included) or toilet flange (not included) and place the bowl by pressing
5
down.
/ Instale el cuello de cera (no incluido) o la brida sanitaria (no incluida) y coloque la taza
presionando hacia abajo.
3
Installation using Wax Ring
Instalación usando Cuello de Cera
wax ring
(not included)
cuello de cera
(no incuido)
drain
desagüe
Bowl Installation / Instalación Taza
Place the tank on a soft surface, then place the tank to bowl
7
gasket (included) and screw the extension (included) onto the fill
valve connection.
/ Coloque el tanque en una superficie suave,
posteriormente coloque el empaque esponjoso (incluido) y
enrosque la extensión (incluida) en la conexión de la válvula de
admisión.
fill valve
válvula de alimentación
15/16"-14 NS-1
extension (incluida)
extensión (included)
Verify that the o-ring is placed in the extension.
Verifique que esté colocado el o'ring en la extensión.
Drill with Ø 3/8" concrete drill bit (not
/ Trace sus líneas
3
included) and
(includes) into the holes.
con broca de Ø 3/8" para concreto
(no incluida) e inserte los taquetes
(incluidos) en los barrenos.
Finished Wall
Muro Terminado
Top View
Vista Superior
use these holes
to see the
installation
utilice las mirillas
para visualizar
la instalación
toilet flange
(not included)
brida sanitaria
(no incuida)
Use the fixing kit provided with the product.
Utilice el kit de fijación contenido en el producto.
tank to bowl gasket
(included)
empaque esponjoso
(incluido)
/
insert
the anchors
/
Barrene
anchors
(included)
taquetes
(incluidos)
drain tube
tubo de
drill hole
drenaje
barreno
Installation using Toilet Flange
Instalación usando Brida Sanitaria
Press the blue button and slide back the mechanical actuator to
8
remove it and free up space to install the tank to the bowl.
el botón azul y deslice hacia atrás el accionador mecánico para
removerlo y liberar espacio para instalar el tanque a la taza.
blue button
botón azul
To assemble again, press the button to connected in position.
nuevamente, presione el botón hasta conectarlo en su posición.
Manually screw the nuts into the bolts and
4
then screw the bolts into the anchors,
unscrew the nuts from the bolts.
Manualmente enrosque las tuercas en las
pijas y después enrosque las pijas en los
taquetes, desenrosque las tuercas de las
pijas.
bolt with nut
pija con tuerca
nut (included)
tuerca (incluida)
bolt
drain tube
(included)
tubo de drenaje
pija
(incluida)
Insert the washers and screw the nuts to fix
6
the bowl.
/ Inserte la rondanas y enrosque
las tuercas en las pijas, para fijar la taza.
nut
tuerca
washer
rondana
Do not tighten the nuts more than necessary, to
prevent damaging the product.
No apretar las tuercas más de lo necesario, para
evitar daños a el producto.
mechanical actuator
accionador mecánico
/
1,57" min.
(4 cm mín.)
/ Presione
/ Para ensamblar

Publicidad

loading