Panasonic CQ-R255SEUC Manual De Instrucciones página 18

Clock Basics
(The clock system is 12-hours.)
Initial Time Setting
® Press and hold 0 for more than 2 seconds.
"AdJ" is displayed.
® Press and hold 0 again for more than
2
seconds. "
12
" blinks indicating the time set¬
ting mode is activated.
© To set hours, press or "<".
© Press again
0
for minute setting.
© To set minutes, press or "<"•
Hold or "<B to change numbers rapidly.
© When you have set the time, press
0
Resetting the Time
When you want to reset the time, press and hold © for more than 2
seconds to activate the time setting mode. Then, repeat step © to ©
above.
Selecting the Clock Display
Press and hold © for more than 2 seconds for clock display.
Press
0
once again, the current audio display mode resumes.
When power is turned off while the time is displayed, the clock mode
remains on. When the PWR is pressed again, the system is com¬
pletely off.
Note:
Before you leave your car that has no ACC, be sure to switch
power off.
18
CQ-R255SEUC