Specifications
GENERAL
Power Supply
12 V DC (11 V -16
V)
Test Voltage 14.4 V, Negative ground
Maximum Power Output
40 W x 4 channels at 400 Hz, Volume Control maximum
Tone Action
Bass ; ± 12 dB at 100 Hz
Treble; ± 12 dB at 10 kHz
Current Consumption
Less than 2 A (tape mode, 0.5 W 4-speaker)
Pre-Amp Output Voltage
2.0V (CD Play mode; 1 kHz 0 dB)
Speaker Impedance
4 ft (4 - 8 Q acceptable)
Dimensions (W x H x D)
7" x 1-15/16' x 5-7/8" (178 x 50 x 150 mm)
Weight
3 lbs. 8 oz. (1.6 kg)
AM RADIO
Frequency Range
530- 1,710 kHz
Useable Sensitivity
28 dB/pV (25 |iV/ S/N 20 dB)
FM STEREO RADIO
Frequency Range
87.9- 107.9 MHz
Usable Sensitivity
13.2 dBf. (1.25 pV/75 O)
50 dB Quieting Sensitivity
15.2 dBf. (1.6 pV/ 75
Q)
Frequency Response
30- 15,000 Hz ±3 dB
Capture Ratio
1.5 dB
Alternate Channel Selectivity
75 dB
Stereo Separation
35 dB at 1,000Hz
Image Response Ratio
65 dB
IF Response Ratio
100 dB
Signal/Noise Ratio
70 dB
TAPE PLAYER
Reproduction System
Tape Speed
FF/REW Time
Frequency Response
Wow and Flutter
Signal/Noise Ratio
: 4-track, 2-program stereo
: l-7/8"/sec (4.76 cm/sec)
: Less than 110 sec (C-60)
: 35 - 14,000 Hz ±3 dB (normal)
35 - 17,000 Hz ±3 dB (metal)
: 0.12 % (WRMS)
: 52 dB (Dolby B NR on;62dB)
'Above specifications comply with EIA standards.
Note:
Specifications and design are subject to modification without notice due to improvements in technology.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol □□ are trademarks of Dolby Laboratories Licensing Corporation.
Part
15
of the FCC Rules
(This standard is for U.S.A. only)
This unit has been manufactured under the part 15 of the FCC Rules.
Do not attempt to make any changes or modifications to this unit.