VMI WALLY Instrucciones De Instalación página 6

RIGID DUCT INSTALLATION
1. Securely connect the rigid ducting to the unit's spigot, using a suitable adhesive. See Outlet Option 3
for Install, page 29.
2. Secure diffuser to the rigid ducting, using a suitable adhesive.
3. We recommend a maximum of 2.5m of rigid duct (Inlet and outlet) with a maximum of two 90° bends however,
this could vary depending on the airflow requirements of the individual property.
The diagrams below are simplified, the inlet ducts, duct cover and clips are not shown, your installation may vary.
5