Descargar Imprimir esta página

CORBERO CCHMP1023N Manual De Instrucciones página 13

Horno integrable

Publicidad

Idiomas disponibles

Idiomas disponibles

Function setting
1.
In standby or reminder state, turn knob "K1" to select the function.
2.
Turn knob "K2" to adjust the temperature.
3.
Press the "
" key to start cooking.
4.
If you skip step 2, press the "
and the display screen shows the default temperature.
Notes
1.
During cooking, the time can be adjusted by turning the knob "K1". After adjusting
the time, please press the "
2.
During cooking, the temperature can be adjusted by turning the knob "K2". After
adjusting the temperature, please press the "
Lamp function
Turning on the lamp can better observe the cooking situation of food. If you need to
turn o or turn on the lamp, you can follow these steps:
1.
Turn knob "k1" to select "
2.
Press the "
" key to confirm.
Reminder function
This function will help to remind you to start cooking in a certain time. Only when oven
in standby mode and clock setting, the reminder can be set.
1.
Press the "
" key, and the hour digit flashes.
2.
Turn knob "k2" to adjust the hour digit.
3.
Press the "
" key, and the minute digit flashes.
4.
Turn knob "K2" to adjust the minute digit.
5.
Press the "
" key to complete the setting, and the icon "
countdown starts. After the countdown is completed, the buzzer sounds and the
icon "
" goes out.
Notes
1.
You can cancel the reminder by pressing the "
2.
After setting the reminder, you can press the "
Inquiring function
1.
During cooking process, if the clock has been set, press the "
current time; If the reminder function is set, press the "
reminder time.
2.
In reminder state, if the clock is set, press the "
" key to start cooking. The default time is 9 hours,
" key within 3 seconds to confirm.
".
EN-11
" key within 3 seconds to confirm.
" is always on, and the
" key during setup.
" key twice to cancel the reminder.
" key to check the
" key to check the
" key to check the current time.

Publicidad

loading