Publicidad
Idiomas disponibles
Idiomas disponibles
CLEAN AND MAINTENANCE
Cleaning
Disconnect the power supply before cleaning and maintenance.
In order to ensure the life of the oven, it should be thoroughly cleaned frequently.
Cleaning steps are as follows:
1.
After cooking is complete, wait for the oven to cool down completely.
2.
Remove oven accessories, rinse with warm water and dry.
Use a hot rag to clean food residue or grease from the oven.
3.
4.
Clean the oven surface with a soft cloth dampened with detergent and dry.
Notes
1.
Do not use sharp cleaning tools, hard brush and corrosive cleaning products, so as
not to damage the oven and its accessories.
2.
Do not use rough scrubbing agent or sharp metal spatula to clean the door glass.
Lamp Replacement
Switch o and disconnect the power from the oven. Ensure that the internal parts are
1.
cool before touching internal parts.
2.
Remove the lamp cover by turning it counter-clockwise (note, it may be sti ), replace
the bulb with a new one of the same type.
Insert the new bulb, which should be resistant to 300°C. For replacement bulbs
3.
contact your local service centre.
Re-fit the cover.
4.
If in any doubt, consult a qualified electrician for help.
5.
WARNING:
To avoid electric shocks-please ensure that the electricity supply to the appliance is
switched o and the appliance is fully cold. before removing the lamp lens.
EN-14
Publicidad
