Descargar Imprimir esta página

DeWalt DWP352VS-BR Manual De Instrucciones página 28

Lijadora de banda

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Areas where paint removal is occurring should be sealed with
plastic sheeting of 4 mil (0.10 mm) thickness.
3. Sanding should be done in a manner to reduce tracking of paint
dust outside the work area.
CLEANING AND DISPOSAL
1. All surfaces in the work area should be vacuumed and
thoroughly cleaned daily for the duration of the sanding project.
Vacuum filter bags should be changed frequently.
2. Plastic drop cloths should be gathered up and disposed of
along with any dust chips or other removal debris. They should
be placed in sealed refuse receptacles and disposed of through
regular trash pick-up procedures. During clean up, children and
pregnant women should be kept away from the immediate work
area.
3. All toys, washable furniture and utensils used by children should
be washed thoroughly before being used again.
Motor
Be sure your power supply agrees with the nameplate marking.
Voltage decrease of more than 10% will cause loss of power and
overheating. D
WALT tools are factory tested; if this tool does not
E
operate, check power supply.
DESCRIPTION (FIG. 1)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Dust bag
F. Lock button
B. Spring clips
G. Trigger switch
C. Dust spout
H. Variable speed dial
D. Main handle
I. Lever
E. Front handle
J. Idler pulley
FIG. 1
A
D
I
INTENDED USE
This heavy-duty belt sander has been designed for professional
sanding at various work sites (i.e., construction sites).
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
This heavy-duty belt sander is a professional power tool. DO NOT
let children come into contact with the tool. Supervision is required
when inexperienced operators use this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and
removing accessories, before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Prior to assembly and adjustment, always unplug tool.
26
F
B
G
C
H
E
J

Publicidad

loading