Ross AuraLine Breeze Manual De Instrucciones página 4

INSTRUCTIONS
This stylish, slim DC tower fan is equipped with:
9 fan speeds
•
Sleep mode (L) appropriate for night time use
•
Boost mode (H) for maximum powerful airflow
•
Oscillation function for optimum airflow distribution
•
8-hour timer
•
Remote control for convenient operation of all functions
•
LED display, which is also a soft touch control for operation
•
of basic functions
Set-up and Connection
Place the tower fan on a dry, level and stable surface, taking into
consideration all relevant safety advice from the previous pages.
lnsert the plug into an appropriate electrical socket and switch on
power at the outlet. The fan will be in standby mode.
Soft Touch Control
The LED display at the front of the unit is also a soft touch control
for the fan. Touch the display for the below operations:
TURN ON/TURN OFF – Touch the LED display to turn on the fan.
•
To turn off the fan, press the display for 2 seconds until the fan
beeps twice.
CHANGE SPEEDS – After the fan is turned on, touch the LED display
•
for less than 1 a second to change the speeds. Each touch will increase
the speed by 1 setting. The settings will circulate in below order and
appear on the display: 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9.
OSCILLATION – For oscillation, press the display for 1 second until
•
the fan beeps. To stop oscillation, press the display for 1 second
again until the fan beeps.
OPERATION BY REMOTE CONTROL
You can access all functions of the fan by using the remote control.
Point it towards the remote control sensor at the front of the fan and
ensure that nothing is obstructing the path of the signal. Handle the
remote control carefully; do not drop or throw it. Press the remote
control buttons for the below operations:
OTHER USEFUL INFORMATION
WARNING!
Before cleaning, maintenance or moving the fan, always
switch off the fan and unplug it from the wall outlet.
Do not immerse the fan in water or other liquids.
Do not spray it with liquids. Do not allow water to drip on
or into the fan motor housing.
Never use petrol, solvents, harsh detergents, or abrasive
or alkaline cleaners on the fan.
TROUBLESHOOTING
lf your fan fails to operate, or you experience any other problem with the
fan, contact our after sales support centre for advice or to arrange a
service. But before phoning for a service, please ensure that your fan is
properly connected to your power supply, the outlet socket is working,
and the air outlet is clean.
CLEANING AND MAINTENANCE
Clean your fan regularly to ensure proper and reliable operation.
|
4
Turn on the fan or set
it into standby.
Set the fan to Boost
mode. "H" will appear
on the display. The fan
will be boosted to deliver
9 Maintenance and maintenance
maximum powerful airflow.
Unplug the power supply before performing maintenance. Increase the fan speed.
Please do not put the fan on the water or splash it,
Reduce the fan speed.
which may cause the machine be damaged.
Do not use banana oil, benzine, alcohol, bleach or metal
objects to wipe the surface of the fan, which may cause
discoloration of the surface.
Surface cleaning
Wipe the surface with a soft, dry cloth;
If especially dirty, dilute with a mild detergent and wipe with a soft cloth.
Then wipe with a dry soft cloth.
CLEANING THE TUBE
Air inlet/outlet
Ensure the fan is switched off and unplugged.
Clean the tube and air outlet periodically with a
Use a soft brush or a vacuum cleaner to clean the
vacuum cleaner nozzle (soft brush) to remove
dust at the air inlet and outlet. Please clean it when
any dust or dirt that may have accumulated
inside or on the unit. Alternatively, use a soft
there is less dust. Too much dust is not healthy and
damp cloth, but ensure it is not too wet.
will reduce fan efficiency.
For intense cleaning, disassemble the tube by
twisting the conical bottom of the tube counter
clockwise. Use running water to rinse the inside
Remote contral
of the tube and dry it thoroughly afterwards.
Gently wipe the surface of the remote with a soft,
CAUTION!
dry cloth.
Do not install the tube onto the fan
until it is completely dry. Do not place
If you don't use it for a long time, avoid battery
the tube in a dishwasher. Always
consumption.
reinstall the tube before use.
Please remove the battery inside the remote control.
Storage
Not used for a long time can be placed in a plastic bag after clean;
Start/stop oscillation.
Set the timer to turn off
the fan after 1-8 hours.
Set the fan to Sleep
mode. "L" will appear
on the display. The fan
will deliver a quiet, soft
breeze for sleeping.