Publicidad
Idiomas disponibles
Idiomas disponibles
To stop the product
•
Set the throttle control in the stop position.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
General product maintenance
Make sure that there are no fuel or oil leaks.
Clean the product.
Make sure that nuts and screws are tightened.
Examine the throttle control and choke control for dam-
age.
Make sure that the throttle control and the choke control
can move smoothly.
Do a check of the oil level in the rammer leg.
Replace the oil in the rammer leg.
Tighten the bolts on the rammer shoe.
Examine the vibration damping units for damage.
Examine the cover knob for damage.
Engine maintenance
Do a check of the fuel level and the engine oil level.
Do a check of the air filter indicator. Clean or replace the
air filter.
10
Maintenance
Read and understand the
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = Refer to the engine manual for instructions.
Before use,
After the
each 10 h
first 20 h
*
X
*
*
*
X
X
X
Before use,
After the
each 10 h
first 20 h
X
X
Weekly,
Yearly, each
each 100 h
500 h
X
X
X
X
Weekly,
Yearly, each
each 100 h
300 h
X
2424 - 002 - 18.04.2024
Publicidad
