Function of the filter retention clip
Turn up the filter retention clip to catch the filter in case the filter falls off from the portafilter when pouring
out the coffee residue.
BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the appliance with warm water as following.
Important: there is a rubber (A) inserted in the bottom of the water tank. Please remove it before use. It is for
manufacturing purpose from factory; users can throw it away after removing the packaging.
1.
Pour water into the water tank; the water level should not exceed the mark "MAX" in the tank. Then
replace the water tank cover.
Note: the appliance is supplied with a detachable water tank for easy cleaning; you can fill the water tank
with water firstly, and then put the water tank into the appliance.
2.
Set the filter into the portafilter (no coffee powder inside), and then attach the portafilter onto the group
head (see Fig.1). Turn the portafilter anticlockwise as far as it will go until it is locked tightly (see Fig.2 and
Fig.3).
Fig.1
3.
Place an espresso cup you have prepared on the drip plate. Make sure the steam knob is set at the off
o
position "
".
Note: Since the appliance is not equipped with any cup or jug, please prepare your own jug or cup.
4.
Plug in the appliance.
5.
Press the on/off button to turn on the unit. The indicator light of the on/off button will blink.
6.
Wait until the indicator light of the on/off button turns to illuminate solidly, press the coffee button to
Fig.2
- 4 -
Fig.3