Publicidad
Idiomas disponibles
Idiomas disponibles
Mnt Fimter
The lint filter must be used during washing
It must be cleaned after each wash.
1. Take off the lint filten Pull up the lint filter from the
inner tub.
2. Remove the lint fiJfen
3. Reinstall
the lint filter.
Take off
install
the inner
Cover
1. Open the top lid of the washing machine,
2. Put the inner cover component on the outer tub cover, aiming the inner cover
shaft to the installation hole of the corresponding outer tub cover shaft groove,
3. insert the inner cover shaft of one side into the corresponding outer tub cover
shaft groove, then push the other inner cover shaft into the corresponding
outer tub cover shaft groove.
4. Do not disassemble after installation.
-Outer tub covey shaft gloove
Section I enlarging
Publicidad
