Publicidad
Idiomas disponibles
Idiomas disponibles
E
Nylon grommet (for metal cabinets)
F
Exhaust adapter
G
Mounting plate
(attached to the back of the appliance)
Not shown:
¡ Top cabinet template
¡ Rear wall template
¡ Metal grease filters
¡ Charcoal filter (factory fitted in the appliance)
3.3 Tools and parts needed
Prepare these tools and accessories before you start to
install your appliance.
¡ Cross head screwdriver
¡ Pencil
¡ Measuring tape
¡ Straight edge
¡ Drill
¡ Drill bits: ³⁄₁₆", ½", ⅝"
¡ Safety gloves
¡ Saw (saber, hole or keyhole)
¡ Stud finder or hammer
¡ Safety glasses
¡ Level
¡ Aluminum tape (DO NOT use insulating or cloth duct
tape)
Optional tools:
¡ Carpenter square
¡ Tin snips
¡ Scissors
¡ Filler blocks or scrap wood pieces (for recessed bottom
cabinet installations)
3.4 Power requirements and grounding
The outlet must be properly grounded in accordance with
all applicable codes.
The outlet can be installed anywhere inside the cabinet
above the appliance, within reach of the power cord
(approx. 24 in).
Location requirements
4 Location requirements
Location requirements
4.1 Installation dimensions
CAUTION
This appliance is to be mounted only above countertop
level.
Location requirements en-us
Grounded 120V outlet located inside the cabinet
above the appliance, right side shown as example.
7
Publicidad
