Descargar Imprimir esta página

Be Cool BC9KL2201FW Manual De Operación página 131

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 63
Timer
• When the unit is in standby, first press TIMER button to go to delay stop setting (from
1h to 24h), until the indicator LED lights. The display will blink.
• When the air conditioner is running, press the TIMER button, the timer indicator
LED is on, and the display will blink.
Manual drainage
• If the water compartment is full, the
machine will stop -> turn off the
machine and unplug.
• Note: please move the machine care-
fully, so as not to spill the water in the
water tray at the bottom of the unit.
• Place a water container below the
wa- ter outlet at the back of the unit.
• Unscrew the drain cover and open
the
water plug, the water will
automatically flow into the water
container.
Notes:
• Keep the drain cover and the water plug within reach.
• During drainage, the unit can be tilted slightly backwards.
• If the water container should be too small to hold all the water, stuff the water
outlet with the water plug as soon as possible to prevent water from flow ing onto
the floor or the carpet.
• When the water is discharged, put the water plug back in, and tighten the
drainage cover.
Note:
restart the machine only after the water plug and the drainage cover are securely
tightened, otherwise the condensate water of the machine will flow onto the floor or the
carpet.
DRAINAGE INSTRUCTIONS
S. 130

Publicidad

loading