Chal-tec Boe Manual Del Usuario página 33

CERTIFICATION AND SUITABILITY
Child safety seat
* ECE = European Standard for Safety Equipment
The child safety seat has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment (ECE
R129). The E-mark E (in a circle) and the approval number are located on the
approval label (sticker on the child safety seat).
This approval will be invalidated if you make any modifications to the child
safety seat. Only the manufacturer is permitted to make modifications to the
child safety seat.
Note: The child car seat is suitable for children from 40-150 cm.
Universal Belted Enhanced Restraint System: Suitable for children with
•
a height of 40-105 cm and a maximum weight of 18 kg.
• i-Size booster seat: suitable for children with a height of 100-150 cm.
Note about the 40-105 cm rearward facing Universal Belted Enhanced
Child Restraint System
This is an Universal Belted Enhanced Child Restraint System. It is approved
according to UN /ECE Regulation 129, for use primarily in „Universal seating
positions" as indicated by vehicle manufacturers in the vehicle user's manual.
If in doubt, consult either the Enhanced Child Restraint System manufacturer
or the retailer.
Note on the 100-150 cm i-Size booster seat Enhanced Child Restraint
System
This is an i-Size booster seat Enhanced Child Restraint System. It is approved
according to UN/ECE Regulation 129, for use primarily in " i-Size seating
positions" as indicated by vehicle manufacturers in the vehicle user's manual.
If in doubt, consult either the Enhanced Child Restraint System manufacturer
or the retailer.
Important notes
• Do not use forward facing before the child's age exceeds 15 months
(refer to instructions).
• The product may only be used in vehicles equipped with a 3-point safety
belt according to ECE R16 or an equivalent standard.
Tested and certified according to ECE* R129
Body height
40-150 cm
EN
33