Chal-tec Boe Manual Del Usuario página 49

7. Lift the cover, guide the two shoulder straps of the harness through the
slots in the backrest. Attach the shoulder straps to the metal bracket and
press the harness strap adjustment knob to tighten the straps.
8. Reattach the seat cover properly. The 5-point harness is now removed.
Note: To change from 100-105 cm to 76-105 cm, perform the procedure in
reverse order.
The belt clamp (a) is not
required for the 100-150 cm
model. Therefore, attach
the green belt clamp to the
shoulder straps on the back of
the backrest.
Tip
EN
49