Chal-tec Boe Manual Del Usuario página 37

INSTALLATION OF THE 40-105 CM UNIVERSAL
CHILD RESTRAINT SYSTEM (REAR-FACING)
Installation of the child car seat
1. Fold the reclining board (a) from the back to the front (b). Grasp the red
lever on the front of the child seat and pull the seat to the fully reclined
position (the fourth position). Then release the lever.
2. Place the child car seat on the vehicle seat, making sure it is facing against
the direction of travel. Make sure that the front of the child car seat is tight
against the backrest of the vehicle seat.
EN
37