GE PVM1790 Instrucciones De Instalación página 21

Installation Instructions
I-_ ADAPTING BLOWER FOR
RECIRCULATION (continued)
[_ Pl(]ce the blower unit b(]ck into the opening.
WA RN IN G: Risk ofelectric shock
con cause injury or death. Do not pull or stretch
the blower unit wiring. Make sure the wired are
not pinched.
i
[_ Secure blower unit to oven with the 2 screws
removed in Step 2. Insert the screw in bottom right
screw hole on the b(]ck of the oven.
[_ Repl(]ce blower pl(]te with the screws removed in
Step 1.
,_ _ Blower P late Screws
_! <! /
_t-.._ ._ Back of Oven
,4b_ Z _ Blower M otor
Screw
I-_ MOUNT THE OVEN
AI_L,/'_U/I U I_1: TO avoid the risk of personel
injury (beck injury or other injuries due to excessive
weight
of the microwave oven) or property
damage,
you will need two people to install this microwave
oven.
IMPORTANT: Do not grip or use h(]ndle during
inst(]ll(]tion.
WA RN IN G: Risk ofElectric Shock. Con
cause injury or death: If installing unit with metal
countertops, cover the edge of the power supply
cord hole with the power supply cord bushing.
IMPORTANT: If filler blocks (Ire not used, c(]se d(]m(]ge
m(]y occur from overtightening screws.
NOTE: When mounting
the microw(]ve oven,
thre(]d power cord through
hole in bottom of top
c(]binet. Keep it tight
throughout Steps 1-3. Do
not pinch cord or lift oven
by pulling
[_ Lift microw(]ve oven,
tilt it forw(]rd, (]nd hook
slots (]t b(]ck bottom
edge onto four lower
t(]bs of mounting pl(]te.
[_ Rot(]te front of oven up
(]g(]inst c(]binet bottom.
21