Publicidad
Idiomas disponibles
Idiomas disponibles
Page 2 of 2
Assembly Instructions
1. Align the holes in the table legs (C) and support braces (G) with the holes in the bottom of the table top. Loosely attach the
four table legs and two support braces using the screws (D), washers (E), and hex key (H). Do NOT completely tighten the
screws at this time. See Figure 1.
2. Attach the leg connector bracket (B) to the table legs (C) and support braces (G) using the screws (D), washers (E), and hex
key (H) as indicated. See Figure 2. When attaching the leg connector bracket (B), insert and start all twelve screws before
completely tightening any of the screws. Once all twelve screws have been inserted, securely tighten all of the screws (including
the 14 screws left loose in Step 1). After all 26 screws (D) have been securely tightened using the hex key (H), install the PVC
screw covers (F). See Figure 3.
Figure 3
3. Carefully turn the table over into the upright position.
Messina
Figure 1
Figure 2
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !
TM
Dining Table
Model #: 12255-002 / 012
Model #: 12255-003 / 013
Model #: 12255-004 / 014
Publicidad
