Descargar Imprimir esta página

Liberty Pumps XLSG200 Serie Manual De Instalación página 2

Ocultar thumbs Ver también para XLSG200 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Safety Information
DANGER
DANGER
WARNING
WARNING
CAUTION
CAUTION
NOTICE
NOTICE
ALWAYS disconnect the supplied pump(s) from their power sources before handling or making any
adjustments to either the pump(s), the pump system, or the control panel.
Only qualified personnel should complete fixed wiring and electrical connections, according to all
local and national electrical codes, during a pump system installation.
After installation, be certain that the pump is properly grounded, using its supplied grounding con-
ductor. Failure to properly ground the pump system can cause all metal portions of the pump and its
surroundings to become energized.
During flood conditions, submerged electrical connections can energize the water. Always wear
dielectric rubber boots and other applicable Personal Protective Equipment (PPE) when water is on
the floor and you must service an energized pump system. DO NOT ENTER THE WATER if the
water level is higher than that of the protection your PPE offers or if your PPE is not watertight.
NEVER lift or carry a pump or a float assembly by its power cord. This will damage the power cord,
and could expose the electrically live wires inside the power cord.
DO NOT bypass grounding wires.
The electrical power supply shall be located within the length limitations of the pump power cord,
and for below grade installations it shall be at least 1.22 m (4 ft) above the floor level.
NEVER use this product in applications where human contact with the pumped fluid is common
(such as swimming pools, fountains, marine areas, etc.).
This safety alert symbol in your manual and on the pump is intended to alert you
to a potential risk for injury or death.
This is a safety alert symbol identifying risk of electric shock. It will be accompa-
nied with an instruction intended to minimize your potential risk of electric shock.
This is a safety alert symbol identifying risk of fire. It will be accompanied with an
instruction intended to minimize your potential risk of fire.
This is a safety alert symbol identifying risk of injury or death. It will be accompa-
nied with an instruction intended to minimize your potential risk of injury or death.
Warns of hazards that will cause serious injury or death.
Warns of hazards that can or will cause minor or moderate injury.
Warns of hazards that can cause personal injury, death, or property damage.
Signals an important instruction related to the pump. Failure to follow these in-
structions could result in pump component failure, or improper operation of the
unit, possibly resulting in property damage .
WARNING
RISK OF ELECTRIC SHOCK
with electrically live parts, items, fluid, or water can cause
serious injury or death.
©Copyright 2017 Liberty Pumps Inc. All rights reserved.
- Accidental contact
2

Publicidad

loading