Publicidad
Idiomas disponibles
Idiomas disponibles
CHANGING DOOR OPENING SIDE
This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge kit
comes with the unit (in the box), should you wish to reverse the hinge on your unit.
For your safety, please unplug appliance before doing this operation.
Parts
① Door screws
② Hinge cover screw
③ Right hinge cover
④ Hinge screw
⑤ Right hinge
1. Loosen screws ① and screws ②, remove the right hinge cover③.
Then remove the screws ④ and remove the upper right hinge and the door. (Fig.A)
2. Place the door in a safe place, remove the pin hole cover ⑥, loosen the screws ⑦ under the door and
3. Take the axle hole cover ⑬ and the left axle ⑨ from the spare parts bag, install the axle hole cover
take out the right pin ⑧. (Figure B)
⑬ in the bottom of the door and install the left axle ⑨ in the upper right side Door. (Figure B)
4. Take the door support ⑪ from the lower left hinge ⑩ and install it on the lower right hinge ⑫. (Figure
C)
6. Remove the upper hinge ⑭ from the spare bag, install the upper left hinge ⑭ on the upper left side of
5. Turn the door 180 degrees and place the left axis ⑨ in the lower left hinge ⑩, close the door.
the cellar with the screws ④, adjust the door and place the upper left hinge ⑮ on the upper left hinge ⑭
with the screw ②. Finally fix the fixing screws ① on the door. (Fig.D)
Finally replace the upper right hinge cover ③
⑥ Axle hole cover
⑦ Fixing screw
⑧ Right hinge pin
⑨ Left hinge pin
⑩ Lower hinge left
⑪ Door support
⑫ Lower right hinge
⑬ Hole cover
⑭ Upper hinge. left
⑮ Left hinge cover
67
Publicidad
