AOVOPRO ES80 Manual página 46

Real time speed shows the current travel speed of the scooter
Connected: Press to connect/ disconnect the scooter with Bluetooth settings on your smart device
Lock/Unlock: Press to lock the scooter so it cannot be used, press it again to unlock the scooter so it can
be used.
Light on/off: Press to turn the LED headlight on the scooter on or off.
Settings: Press to access the settings page where a range of
settings can be adjusted. Press the arrow in the top left corner to
exit out of the settings page and to use the scooter.
Riding mode:
Switch between 3 x convenient pre-set speed levels,
Eco: 12 km/h
Slow: 18 km/h
Sport: 25 km/h
Boot mode:
Change between kick start or taxi mode.
Kick start: Use your foot to start gliding with the scooter, then
adjust the speed using the speed lever.
If the speed lever is pressed while it is in kick start mode, the
scooter will not ride.
Taxi mode: Use the speed lever to start the scooters ride.
Advanced settings page:
Accelerated response:
Adjust the sensitivity of the accelerator from level 1 up to level 10.
Brake response:
Adjust the sensitivity of the brake response from level 1 up to level 10.
Speed limit value:
The speed limit for the scooter can be set on the app for increased
safety.
The speed limit can be set between 15 km/h - 25 km/h
The default speed is 25 km/h.
46