AOVOPRO ES80 Manual página 52

The scooters highest speed setting is 25 Km/H. This needs to be changed by using the advanced settings
in the app.
For your safety, please limit the speed within 0 – 20 Km/H.
At night, it is recommended to limit the speed to 15 km/H or less and use the LED headlight.
Choose a suitable venue for riding.
Start
1 . Press the on/ off button to turn on the power.
2 . Stand one foot on the scooter and leave another foot on the ground.
3 . Gently press down on the speed lever, the scooter will immediately move forward slowly. Place the
foot which is on the ground on the scooter.
With big finger of your right hand press the speed lever, the greater pressure you put, the faster it will go.
Brake
Under normal circumstances, pressing the brake handle, the scooter will be immediately de- energized
and then it will brake.
The greater pressure you add, the greater breaking force will be.
Cruise control
Using the app, ensure that cruise control is ON.
You can set up the speed as you want during the ride, and the scooter will start moving on the same
speed afterwards.
Press the speed lever and keep the same speed for 8 seconds.
The scooter will make a beep sound and the cruise control will automatically enter operation.
You can stop cruise control by pressing on the speed lever once.
Zero start
This function is for safety.
In the app, change between taxi and zero start
Taxi start: Use your foot to start gliding with the scooter, then adjust the speed.
If the speed lever is pressed while it is in kick start mode, the scooter will not ride.
Zero: Use the thumb accelerator to start the scooters ride.
RIDING OPERATION
52