neno Bella Twin Manual Del Usuario página 13

9. Clean and disinfect your breast pump first each time you intend to store an
extracted milk.
10. Do not clean machine parts with abrasive cleaners.
11. Do not attempt to repair the breast pump yourself - this will invalidate the
warranty.
12. If using the device causes pain or severe discomfort, switch it off and move
the breast pump away from the breast.
13. The tube does not require washing. Make sure the tube is dry before each
use. The wet tube may damage the device.
14. Do not connect the charging device to a voltage higher than specified.
02. BEFORE FIRST USE
FIG. 1
1. Connect the breast pump to the power supply. Charge the batteries for 2
hours.
2. Disconnect the parts of the breast pump that will be in direct contact with
the breast or milk.
3. Unscrew the milk bottle from the connection.
4. Pull the valve down to disengage it from the connector.
5. Remove the lid from the funnel and pull the funnel off the joint.
6. Remove the gasket cover and gasket from the joint.
7. Wash the device components (please refer to the CLEANING AND DISINFEC-
TION section).
03. ELEMENTS
FIG. 2
A. Lid x2
B. Funnel (24mm diameter) x2
C. Suction bowl cover x2
D. Suction bowl x2
E. Connector x2
F. Valve x4
G. Milk bottle x2
H. Bottle stand x2
I. Tube
J. Charging cable
K. Pumping device
L. Teat set x2
M. Bottle cap
04. DISPLAY ICONS
FIG. 3
13