neno Bella Twin Manual Del Usuario página 14

1. Power button (B) - Hold the button for 2 seconds to turn the device on or off.
2. Mode change button (H) - Press this button to change the device opera-
ting mode. There are 2 operating modes of the device (stimulation, deep
pumping).
3. Changing the suction level - Press „+" (I) to increase the suction power or
„-" (A) to decrease the suction power. (Pacing (D) mode: L1-L9 levels; Deep
Pumping (F) mode: L1-L9 levels.)
4. Battery status (C) - The battery icon shows the battery charge status. Con-
nect the device to charge when the battery is low.
5. Device operation time (G) - This indicator shows how many minutes have
passed since the breast pump was turned on. The device will automatically
turn off after 30 minutes.
6. Suction Level (E) - Shows the currently selected suction level.
05. CLEANING AND DISINFECTION
Washing and sanitizing are two different activities. They must be done sepa-
rately to protect your baby and to ensure that the breast pump is working
properly.
Washing - washing the surface of the device and removing impurities.
Disinfection - killing organisms such as bacteria or viruses that may be present
on the surface of the device.
Funnel and funnel cover, elements of the breast pump (joint, gasket, gasket
cover), bottle and nipple:
Before the first use - washing and disinfection.
After each use - washing.
Once a day - disinfection.
CAUTION:
- Separate and wash all parts of the appliance that come into contact with milk
immediately after using the appliance . Thanks to this, you will remove sediment
from milk and prevent the growth of bacteria.
- Use only potable tap water for cleaning . Use bottled water if your tap water
does not meet this requirement .
- When cleaning the valves , do not use brushes . Be careful not to pierce the
valve straight through.
- Disassemble, wash and rinse all parts of the breast pump that come into
contact with milk, except the pumping device .
- Use a mild washing - up liquid or soap when washing the elements of the
breast pump.
FIG. 4.A
1. Washing (before first use and after use - in a sink ):
a. Rinse all the detached parts ( which have come into contact with the
14