Publicidad
Idiomas disponibles
Idiomas disponibles
Set Location
Edit the location of the speaker in relation to your television
and your preferred listening position.
Remove
Disconnect the paired speaker from the TV.
Restart
Restarts the speaker.
Version
Displays the current firmware version of the speaker.
Using Dolby Atmos
To listen to Dolby Atmos audio through your AQUOS
Wireless Surround system, you will need Dolby Atmos
content delivered to your AWS SHARP TV and DAP (Dolby
Audio Processing) set to ON in the TV sound menu.
Dolby Atmos content is available via some broadcast
services, streaming services or via external devices
connected by HDMI e.g. a Dolby Atmos compatible games
console or Blu-ray player.
For more information on Dolby Atmos content availability
visit dolby.com.
AQUOS Wireless Surround will also offer an enhanced audio
experience for other audio source types such as Dolby
Digital, DTS and PCM. With DAP enabled, Dolby Audio
Processing will render even 2.0 channel audio and utilise
the available speakers connected.
Due to the way multi-channel signals are processed, the
output volume of normal 2.0 channel signals through the
rear surround speakers may appear low. This is not an issue
with the speakers, but a characteristic of the way in which
Dolby processes the source signal.
NOTE: A Dolby Atmos signal cannot be
transmitted via an optical or analogue connection
e.g. AUX, from an external device.
Night mode
Night mode allows low volume listening by muting the TV
speakers and only using the connected rear speakers. The
stereo profile is swapped, so left and right channels will
remain faithful to the media being played.
To activate night mode:
1. In the Wireless Speaker menu, turn <Wireless
Speaker> to "On".
2. Open the TV's sound settings menu and select <DAP
Settings>.
3. Open <Sound style> and select <Night mode>
Deactivate night mode by selecting another sound
style.
NOTE:
ū Night mode is only available with the Wireless Speakers
set to "On".
ū If you have the CP-AWS0101 subwoofer, this will also be
muted.
Firmware upgrade
Check if a firmware upgrade is available.
In the televisions Wireless Speaker menu, select <Firmware
upgrade> to check if an update is available.
If the TV is connected to the internet, the speakers will
perform an over-the-air update.
NOTE:
ū If the update process begins, do not disconnect power to the
TV or turn the TV into standby mode.
ū Ensure your TV is connected to the internet during the
update process.
EN
Publicidad
