3. Parts and Controls
4. To Use
Attach one of the supplied Massage Attachments over the massage head. Make sure the device is switched
off and then plug the power cord into a standard electrical outlet. Switch the device on by sliding the power
switch to the desired massage setting "M" or "M+H."
Guide the device with both hands to the area of the body to be massaged. You can stand, sit, or lie down. You
can alter the massage intensity by pressing down firmly or gently. Do not massage one part of the body longer
than three minutes before moving to other areas.
WARNING:
• Stop the massage or change the position of the massager if it is painful or unpleasant.
• Do not jam or force any part of your body, particularly your fingers, into the massage head.
NOTE
Do not use the massage device right before going to bed. The massage can have a stimulating effect and may
make it difficult to fall asleep.
5. Care and Storage
WARNING:
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Ensure no fluids enter the device or accessories.
• Do not use the device until it is completely dry.
6. Cleaning
Unplug the device and allow it to cool before cleaning it with a damp cloth and, if necessary, a mild detergent.
7. Storage
Keep the massage device in a cool and dry place where it is out of the reach of children, preferably in its original
packaging.
8. Specifications
Dimensions:
2.5" W x 3.1" H x 13" L (65 x 80 x 330 mm)
Weight:
0.9 lbs (0.41 kg)
Rated output:
5W
Rated voltage:
120V ~ 60Hz
9. Warranty
Limited Lifetime Warranty For Original Purchaser
Your Beurer massager with heat, Model MG 21, is warranted to be free from defects in materials and workmanship
for the life of the product under normal conditions of intended use and service. This warranty extends only to the
original retail purchaser and does not extend to retailers or subsequent owners.
1
1 - Power Switch
O: Off
2
M: Vibration massage
M+H: Vibration massage with heat
2 - Massage head with heat
3 - Massage Attachments
3
4