Publicidad
Idiomas disponibles
Idiomas disponibles
en-us
Operating the appliance
Operating the appliance
T urning on
O p e r a t i n g t h e a p p l i a n c e
The two grill elements can be controlled separately. This
means that you can grill foods that require different
temperatures at the same time. If required, you can
connect the two grill elements together and set the same
grill setting at the same time for both of them.
Push in the other control knob and turn it to the required
grill setting. If you do not want to cook over the entire
grill zone, switch on the front or rear grill element only.
The illuminated rings behind the control knobs flash
while the appliance is heating up. Once the selected grill
setting is reached, the illuminated rings light up. The
preheating phase at grill setting 12 takes
approximately 15 minutes.
Connecting the grill elements
Note: The two grill elements can be controlled at the
same time using a control knob.
Push in any control knob and turn it to the g position.
1.
2.
Turn the other control knob to the required grill
setting. This grill setting is applied for both grill
elements.
The illuminated rings behind the control knobs flash
while the appliance is heating up. Once the selected
grill setting is reached, the illuminated rings light up.
The preheating phase at grill setting 12 takes
approximately 15 minutes.
3.
Only put the food in the grill once it has finished
preheating.
14
To control individual grill elements again, turn the control
knob from the g position to any of the grill settings.
Turning off
Turn the control knobs to the 0 position.
9
WARNING
Risk of burns!
When the appliance cover is closed, this leads to a
build-up of heat. Only operate or switch on the
appliance when the appliance cover is open. Do
not use the appliance cover for keeping warm or
setting down. Only close the appliance cover once
the appliance has cooled down.
9
CAUTION
Damage to the appliance
Remove spilled liquids before opening the
appliance cover.
Residual heat display
The illuminated rings behind the control knobs flash after
turning off as long as the appliance is too hot to safely
touch it.
Overheating protection
In the event of overheating, the appliance automatically
turns off the grill heating elements in order to protect the
countertop and cabinets. After the appliance has
sufficiently cooled down, turn it back on.
Using the cast iron roasting pan
The cast iron roasting pan is ideal for preparing finely
chopped food, liquids, vegetables, desserts and egg-
based dishes.
The cast iron roasting pan is placed on the rear grill
element once you have removed the wire rack from it. You
can grill other food on the front wire rack at the same
time.
Additional cast iron roasting pans can be ordered as
optional accessories from your specialist retailer.
Note: Leave the lava stone tray and the lava stones in the
grill, even when using the cast iron roasting pan.
Publicidad
