Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1. security WARNINGS
The Solar-Powered Auto-Darkening Welding Helmet is suitable for most welding applications. This helmet's 1/25,000-second
switch time automatically darkens the lens the moment you start welding. No matter what shade the filter is set to, the UV/IR
protection is always present.
ARC Rays can injure eyes and burn skin
•
Before welding, always inspect helmet and auto-darkening filter (ADF) to be sure they are fitted properly and in good
condition.
•
Keep the sensors, solar cell and filter lens clean. Clean the filter cartridge using a soapy water solution and soft cloth. Do
not use solvents or abrasive cleaning detergent.
•
Do not weld in the overhead position while using this helmet.
•
Inspect the filter lens frequently and immediately replace any scratched, cracked, or pitted filter lens or cover lenses.
•
Always wear safety glasses or goggles under the welding helmet, and protective clothing to protect your skin from radiation,
burns and spatter.
3
Publicidad
