Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION PROCEDURE / STEP 3
APPLYING ADHESIVE AND TAPE TO BACK SIDE OF WALL PANELS
3
The following instructions should be used when applying tape and adhesive to each wall panel.
1. Apply double-sided construction tape to the back of the wall panel as shown.
2. Apply construction grade adhesive to the spaces between the tape as shown in a circular pattern.
The beads of adhesive should be 2 apart and up to, but no closer than 1 from the panel edge.
Important: The circular pattern is critical for proper adhesion.
1" Space
Between Panel Edge &
Adhesive Application
2" Space
Between Construction
Adhesive Application
- 6 -
Publicidad
