Philips CD 303 Instrucciones De Manejo página 4

Your Compact Disc player is now
ready for use. Before attempting to
operate it, you are recommended to
familiarise yourself with the func‑
tions of the controls and indicators
as described briefly below. The
names used here for the controls
and indicators will be used through‑
out the text.
OFF
1 ON key: for switching the
and off.
player on
for
2 SELECT key: selecting the
track with which you wish to start
for
playback, and choosing tracks
when compiling a programme.
3 STORE key: for storing tracks
when compiling a programme.
CANCEL key: for cancelling the
4
not
tracks you do want to hear ina
programme.
REPEAT for
5 key: repeating a disc
or a programme.
Off
On and switching
(ON OFF)
You switch the on by press‑
player
OFF key. All the LEDs
ing the ON
the PROGRAM Display will light and
the disc drawer will be illuminated.
When you press the ON OFF key
again, the player is switched off.
The PROGRAM
Display and disc
drawer light will go out.
Loading and Unloading
a Disc (OPEN/CLOSE)
You open the disc drawer by press‑
the OPEN/CLOSE
ing key. The
drawer slides out automatically
the disc pressure plate rises.
With hand open, and thumb
your
and fingers extended, take the
Disc out
Compact of its holder and
fit label side
it, up, on to the spindle
in the disc drawer.
Press the OPEN/CLOSE
key again.
The disc pressure plate comes
down and the drawer slides in auto‑
matically. Take care not to obstruct
the drawer as it closes.
Hold the disc in the same
way
remove it.
the ingress dust and
To prevent of
the formation of a film on the lens of
the laser pick-up, never leave the
drawer open unnecessarily.
Playing t h e Disc (PLAY)
start the disc
You by pressing the
PLAY key: the first TRACK Display
LED will soon as the player
light. As
has read the contents list recorded
at the beginning of the disc, the
number of LEDs alight in the
PROGRAM Display will correspond
to the number of tracks on the disc.
All the tracks will then be played
consecutively.
Going on to t h e Next
Track (PLAY/NEXT)
If you decide to skip the track
played, and go on to the next, press
the PLAY The
key again. lighted
TRACK Display LED moves
on
and until
place play is suspended
the laser pick-up reaches the next
track.
6 PAUSE
key: for short-term inter‑
ruptions during play: stops
but leaves the disc motor
sound,
running.
7 PLAY/NEXT for
key:
(PLAY) and also for moving on to the
next track
during play (NEXT).
8 OPEN/CLOSE
key: for opening
and closing the disc drawer.
9 PROGRAM(me)
display:
bar which indicates the num‑
display
ber of tracks ona disc; also used
as an aid in compiling a programme.
TRACK LED-bar
10 display: a
in which the LEDs light one a t a
play
time to indicate the track in play;
also used to locate tracks for
programming.
11 ERROR LED: flashes to indicate
an operating or programming
12 REPEAT LED:
lights when you
REPEAT
press the key.
13 PAUSE LED:
lights when
press the PAUSE
key.
in
and
Avoid drawer during
opening the
unless mean to
play, your
disc.
to
As
each track ends, the
sponding PROGRAM Display
goes out, while the lighted TRACK
LED moves
Display on
Thus the progress of the playback
is always displayed.
When all the tracks have been
played, the disc stops and all
15 PROGRAM Display LEDs relight;
the TRACK LED
Display
If you press the PLAY
the last track, the ERROR LED will
flash, reminding you that there is no
being
next track. The player will then
first
track on the
begin to play the
disc.
one
You can also use the PLAY/NEXT
mode to get a quick idea of the disc
contents by listening to the begin‑
ning of each track.
the
starting play
a LED‑
dis‑
REV for
14 key:
wards for a particular passage ina
track.
FWD for
15 key:
error.
wards for a particular passage ina
track.
you
stop the
corre‑
LED
one
place.
out.
goes
key during
STOP/CM
back‑ 16
searching
during playback (STOP)
erasing a programme (CM = Clear
searching for‑ Memory).
key: for stopping play
and for