Jimmy HW9 Pro Max Manual De Instrucciones página 8

Clean water tank assembly and
disassembly
To take off clean water tank, hold the clean water tank
handle and pull out the clean water tank. To assemble
clean water tank, put the clean water tank back to
nozzle, align with the brushroll window. (Fig 7)
Brushroll assembly and disassembly
To remove the brushroll assembly, first remove the clean
water tank assembly , then hold the floorhead down with
one hand, rotate the brushroll end cap upwards with the
other hand, and remove the brushroll outward;
When installing the brushroll assembly, first align the
other end of the brushroll with the spline, rorate the
brushroll to the end, and then push the brushroll inward,
rotate the brushroll end cover down and install it in
place, align brushroll cap with the floorhead top surface.
(Fig 8)
Chapter 2 Use of the Product
Note: Before use, please check whether the machine has power, if no power, please fully charge the machine
before using it.
LED screen and instructions
Dirty water
tank full indicator
Auto water
spray indicator
Drying mode
indicator
Battery power
icon display
6
6
7
8
Clean water tank empty indicator
Lights(indicate different power)
Clean water
tank handle
Brushroll cap
Self cleaning
indicator
Battery power
percentage or
left working time
display
Mode display