Publicidad
Idiomas disponibles
Idiomas disponibles
6
*Draft reduction
The [Draft reduction] mode keeps the vane angle more horizontal than the angle of
Step 1 so that the airflow will not be directed toward the people.
This function can be set only for one outlet.
This function cannot be set for models with two or three outlets.
In the Draft reduction mode, the airflow may cause the ceiling discoloration.
32
The current vane setting will appear.
Select the desired outlets from "1," "2," "3," "4," or "1,
2, 3, 4 (all outlets)" with the
Press the
or
F3
F4
options and select the desired setting.
No setting
Step 3
Draft
reduction*
Press the
SELECT/HOLD
A screen will appear that indicates the setting
information is being transmitted.
The setting changes will be made to the selected
outlet.
The screen will automatically return to the previous
screen when the transmission is completed.
Make the settings for other outlets, following the
same procedures.
If all outlets are selected,
the next time the unit goes into operation.
Navigating through the screens
• To return to the previous screen ......
or
button.
F1
F2
button to go through the following
Step 1
Step 4
All
outlets
button to save the settings.
will be displayed
button
RETURN
Step 2
Step 5
Publicidad
