Panasonic CQ-HX1083U Manual De Instrucciones página 56

Troubleshooting
Preliminary Steps Caution:
Check and take steps as described in the tables
e Do not use the unit if it malfunctions or if there
below.
is something wrong.
asking for-repairs. Never try to repair the unit by
yourself because it is dangerous to do so.
Troubleshooting Tips
O Common
Trouble
Cause/Step
Car's engine switch is not on.
Turn your car's ignition switch to ACC or ON.
Cables are not correctly connected.
Connect cables correctly.
Connect the battery cable to the terminal that is always active.
«Connect the accessory cable to your car's ACC source.
Connect the grounding wire to a metal part of the car.
No power.
Fuse is burnt. 9%
Call the store where you purchased the unit, or your nearest
Servicenter (see the attached sheet) and ask for fuse replacement.
Mute is set to ON.
= Set it to OFF.
Cables are not correctly connected.
| =Connect cables correctly.
Condensation (dew).
= Wait for a while before use.
' | A mobile phone is used near the unit.
Keep the mobile phone away from the unit.
The unit's grounding wire is not connected securely.
"Check the metal areas of the car body (chassis), and connect the
grounding wire more securely.
Demonstration mode is ON.
=Press [DISP] (display) to cancel demonstration mode.
56
CQ-HX1083/HR1003U
The display shows
demonstration message.
ary, UT 7 7 =
E, yy £ ban a +
A. ES di ME
E OR