Publicidad
Idiomas disponibles
Idiomas disponibles
- To a clean, bare metallic part of the car chassis.
70
Electrical Connections
Caution:
e This product is designed to operate with a 12 V
DC, negative ground battery system.
e To prevent damage to the unit, be sure to follow
the connection diagram below.
e Remove approximately 1⁄4" (5 mm) of protective
covering from the ends of the leads before con-
necting.
O Wiring Diagram
External amplifier control power ladem
oe
E
(max. 500 mA)
.
l
This lead is for connection to the power amplifier.
Note:
e Do not insert the power connector into the unit
until the wiring is completed.
e Be sure to insulate any exposed wires from-a
possible short-circuit from the car chassis.
Bundle all cables and keep cable terminals free
from touching any metal parts.
e Remember, if your car has a drive computer or a
navigation computer, the data of its memory
may be erased when the battery terminals are
disconnected.
Antenna
{Blue/wnite stripe)
This lead is used for power contro! when an external power amplifier
is connected. The power supply of a power amplifier will be activated
when turning on the power of this unit.
Dual CD changer contro! lead
" --——_——_————
CC
————_———
(Brown/white stripe}
Note:
7
Insulate this lead with vinyi tape when you do not connect it.
—
A A
—_—_
- OS
Antenna control lead
l
(Blue)
(to motor antenna) (max. 500 mA)
This lead is not intended for use with switch actuated power
antenna.
Note:
.
je
The power antenna extends automatically
,
when the AM/FM radio mode is selected.
ACC power lead
eS
ee
ES
To ACC power, +12 V DC.
(Red)
Battery Lead
ef
2ATE005A ]
To the battery, continuous + 12 V DC.
(Yellow)
Ground lead
<<
eee
(Black)
CQ-HX1083/HR1003U
Publicidad
