QiCYCLE P1 Manual De Instrucciones página 29

Charging
2. Power on/off
Please charge it fully before using for the first time. Use
the charging cable to connect the 5V USB adapter to the
inflator for charging.
Battery level icon during charging:
1 grid flashing: 0% < battery level ≤ 25%
1 grid always on, 1 grid flashing: 25% < battery level ≤ 50%
2 grids always on, 1 grid flashing: 50% < battery level ≤ 75%
3 grids always on, 1 grid flashing: 75% < battery level < 100%
4 grids always on: full.
After the battery is fully charged, the inflator will
automatically shut down if there is no operation in 5
minutes.
Note:
The inflator cannot be used during charging.
A safe and compliant power adapter must be purchased
separately.
Power on:
Press and hold the on/off button for 1.5 seconds to
turn on the inflator.
Power off:
In power-on state, press and hold the on/off button
for 1.5 seconds to turn off the inflator.
In the power-on state, the inflator will automatically
shut down if there is no operation within 3 minutes.
During the charging process, the inflator will shut
down when the charging cable is disconnected; it will
also automatically shut down when the battery is fully
charged and there is no operation within 5 minutes.
When the inflator is used as a power bank, it will
automatically shut down when only the battery
indicator lights up on the screen and the charged
device is disconnected.
27