Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Slow inflation speed
Inflator turns on
but does not inflate
Can't increase or
decrease preset pressure
Inflation is normal but the
displayed pressure is zero
Air leaks out when
connecting the air hose
Battery level displayed by
the icon in inflating state
is inconsistent with that in
standby state
Charging speed is slow
The battery level icon
does not light up
after charging
Can't charge
other devices
The inflator has no
response
to the operation in other
conditions
1. Check whether the battery level is sufficient.
2. Check whether the air hose is leaking.
3. Check whether both ends of the air hose are
securely connected.
4. Check whether the item that is being inflated is
leaking.
1. Check whether the battery level is sufficient.
2. Check whether the current tire pressure is
higher than the present value.
Check whether it is in the incorrect inflation
mode. Select the professional mode to adjust the
preset value in the range of 3-150 psi.
1. Low-pressure inflatable products such as
balloons are not within the measurable range of
the device.
2. Check whether the air nozzle is blocked by
foreign objects.
Make sure the air hose is securely connected.
The power lithium battery has a significant
voltage drop during the discharging process,
so the battery level displayed by the icon is
inconsistent with the standby state. This is
normal.
Check if you are using a proper 5V/3A power
adapter and the original USB cable.
Replace the safety-compliant adapter and the
original charging cable and start charging again.
1.Check whether the battery level is sufficient.
2.The output parameter is 5 V/2 A. Please confirm
whether the device being charged is applicable.
3.It can't be used as mobile power in inflating state.
4. Please charge with the original charging cable
that matches the charging device.
Press the light switch and the Mode button at the
same time to restart the device.
Solution
35
Publicidad
