Publicidad
Idiomas disponibles
Idiomas disponibles
12
INSTALLATION
Removing/Assembling the
Refrigerator Door Handles
NOTE
Removing the doors is always recommended when it
is necessary to move the refrigerator through a nar-
row opening. If it is necessary to remove the handles,
follow the directions below.
Removing the Handles
1
Loosen the set screws with a
remove the handle.
2
Loosen the mounting fasteners that connect to the
refrigerator door and handle using a
remove the mounting fasteners.
Mounting
Fasteners
Set Screw
Allen
Wrench
Assembling the Handles
1
Assemble the mounting fasteners at both ends of the
1
handle using a
/
in. Allen wrench.
4
2
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
3
screws with a
/
in. Allen wrench.
32
Mounting
Fasteners
3
/
in. Allen wrench and
32
1
/
in. Allen wrench,
4
Removing/Assembling the
Freezer Drawer Handle
Removing the Handles
1
Loosen the set screws located on the lower side of the
1
handle with a
/
in. Allen wrench and remove the handle.
8
2
Loosen the mounting fasteners that connect to the
freezer drawer and handle using a
and remove the mounting fasteners.
Assembling the Handles
1
Assemble the mounting fasteners at both ends of the
1
handle using a
/
in. Allen wrench.
4
2
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
1
screws with a
/
in. Allen wrench.
8
1
/
in. Allen wrench,
4
Publicidad
