1.1 General safety information for the use of electrical devices:
To avoid injury from or electric shock, please ensure compliance with safety instructions
when using this device. Please read the instruction carefully and make sure that you have
understood it well. Keep the manual near the equipment to be able to read it at any time.
1.1.1 Always use current sources connected to the ground and provide the necessary
voltage (indicated on the label on the device). If you have any doubts, let an electrician
check that the unit is properly grounded. Never use a damaged power cable.
1.1.2 Do not open the unit of solar radiation. Use the device in a protected location to avoid
damaging the equipment or endangering others. Make sure the device is able to cool after 3
hours of constant working and avoid placing it too close to other devices that produce heat.
1.1.3 Before cleaning, disconnect it. Use a soft damp cloth for cleaning. Avoid using
detergent and make sure that no liquid enters the unit. If the metal contains acid or alkali
materials, a chemical reaction may occur that could corrode the heating element. Please
keep the top cover open during melting process.
1.1.4 No internal element of this device needs to be maintained by the user. Please do not
disassemble and repair yourself privately.
1.2 General safety information for the use of melting furnaces:
●The user manual should be kept close to the device and should always be accessible to
the users. Instruct your employees on how to use the melting furnace properly.
Warning - To reduce the risk of injury, user must read instructions
manual carefully.
CORRECT DISPOSAL
This product is subject to the provision of european Directive
2012/19/EU. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories marked
with this symbol. Products marked as such may not be discarded with
normal domestic waste, but must be taken to acollection point for
recycling electrical and electronic devices.
SAFETY INSTRUCTIONS
- 2 -