LBN590POV
1. Remove the cover cap (3) and then remove the glass door by unscrewing the four screws (1) and
(2). Be careful to hold the glass door firmly after removing the screws and place it on a padded
surface to avoid the risk of damage.
2. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right
hand side.
3. Rotate the glass door 180° and refit the glass door to the opposite side. Then screw and tighten it
after the door is leveled.
Repairs and spare parts available
The manufacturer's warranty is applicable for this device for a period of 5 years.
In the event of a malfunction during this period, any request for support must be made to the after-sales
service of your dealer.
Outside the warranty period, any information regarding professional repair services or ordering original
spare parts may be obtained by contacting your dealer.
In accordance with the Ecodesign Regulation, spare parts will be available for at least 7 years from the
date of purchase of your device.
Imported by SIDEME SA / BP200 – 92306 Levallois-Perret cedex – France
1
1
3
GUARANTEE
2
3
2
EN-81