Zeiss EyeMag Smart Instrucciones De Uso página 42

Operation
42
Adjusting the flip-up
The clamping force during lowering can be adjusted using
the enclosed Torx key T5.
– No lowering down during use
• To fasten, turn the 2 screws clockwise by ⅛ turn incre-
ments using the enclosed Torx key T5 and then check
the clamping force. (Fig. 28).
• The clamping force is well adjusted when the head-
worn loupe remains in the set position when the tele-
scope is extended. Otherwise, retighten the screws as
Abb. 28
shown in the previous step.
• To loosen, turn the 2 screws counterclockwise slightly
using the enclosed Torx key T5 (Fig. 28).
EyeMag Smart
G-30-2091, 1.4