ClicKid CAM10 Manual Del Usuario página 7

Basic Operation
Before first use, make sure the ClicKid CAM10 Digital Camera is fully charged. Using
the Type-C Charging Cable, plug the Type-C end into the camera port and the USB
end into a wall charger/Laptop. Once the camera is plugged in, the charging LED
light on the camera will turn red, and once the camera is fully charged the LED light
will turn blue indicating that the camera is now ready to be used.
To switch the camera ON, press and hold down the 'Power' button (on top of the
arrow buttons) for 2-3 seconds. The camera will switch on and display the main
camera features with 6 main tabs on the screen: Camera (Photos), Video, Playback
(Photo & Video Album), Camera Settings, Games and Music.
To select any of these, use the arrow buttons: 'Right', 'Left', 'Up', or 'Down'. Highlight
the one you would like to access and press the 'Photo/Video Shutter' button to
confirm.
To return to the main menu, press the 'Power' button once.
Standby: When your camera is not in use for a few minutes, the camera will go into
Standby Mode and switch OFF the LCD display.
Automatic Switch off: If your camera is not being used after 3 or 5 minutes while in
Standby Mode, the camera will automatically switch OFF.
Note: You can set the length of time for the 'Standby' Mode, and the automatic
switch off time, via 'Camera Settings'.
1. Camera - (enter this tab to take
pictures).
2. Video recording - (enter this tab
to start recording videos).
3. Playback - (enter this tab to view
your photo/video gallery).
4. Settings - (access this tab to
adjust the camera settings).
5. Games - (enter this tab to play
games)
6. Music - (enter this tab to play
audio from your SD card)
Instructions Guide
1
4
2 3
5 6
EN
7