ClicKid CAM10 Manual Del Usuario página 8

Instructions Guide
EN
Camera Settings
To switch camera 'ON', press and hold down the 'POWER' button for 2 seconds. The
list with all 6 tabs will then open. To access the 'Camera Settings' tab use the arrow
buttons to navigate through and highlight the Settings icon. Press the 'Photo/Video'
shutter to button once to enter.
Once in the 'Camera Settings' menu, the following sub-menus will then be displayed
as a list: Size, Capture Timer, Resolution, Time Stamp, Language, LCD OFF, Auto
OFF, Volume, Format, Date Time, System Reset and System Version.
Within 'Camera Settings' you will find the following sub-menus:
Size: Enter this section to adjust the picture size/resolution.
Capture Timer: Enter this sub-menu to adjust the timer for 2, 5, 10 seconds or set to
OFF. Press the' Photo/Video Shutter button to confirm your selection. Once selected
the camera will only use this timer when activated. To use the capture timer, press
the 'Left' arrow button to activate when taking a photo. The camera will then display
a small clock icon at the top of the screen indicating that the timer is active. Press
the 'Photo/Video' Shutter button to take a picture. The camera's display will then
show the downtime counting to 0. Once the timer has ended, the photo is taken.
Resolution: Enter this section to select one of the 3 options available: 1080P, 720P
or VGA (for video).
Time Stamp: Enter this sub-menu to set the time stamp as ON or OFF.
Language: Enter this sub-menu to change the language.
LCD OFF: Enter this sub-menu to set the time that you would like to use for the
camera to go in Standby Mode-this can be after 1 minute, 2 minutes or 3 minutes of
no use or you can set this to OFF if you do not wish the camera to go on Standby
mode.
8