Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
(CONTINUED)
Refer to FIGURE 6
5. Make electrical connections. Wire white to white, black to black,
red to yellow and green or bare wire to green ground screw.
Refer to FIGURE 7
6. Carefully tuck wiring inside wiring compartment and reattach
knockout plate.
7. Install light bulb (100 Watt Max.).
Refer to FIGURE 8
8. Attach grille. Squeeze grille springs and insert them into slots
in motor plate. Push grille against ceiling. Grille may be pa-
pered or painted.
USE AND CARE
CAUTION – DISCONNECT POWER AT SERVICE ENTRANCE
AND LOCK OUT PANEL BEFORE CLEANING OR SERVICING
UNIT.
Grille
Clean grille with mild soap or detergent and dry with a soft cloth.
Do not use abrasive cloth, steel wool pads, or scouring powders.
Filter
Charcoal filter is long-lasting. Each filter will last 60 to 90 days when
operated continuously, or longer depending on frequency of use.
Order replacement charcoal filter from list below.
Fan Assembly
To clean: Remove grille and filter. Gently vacuum impeller, motor
and interior of housing.
CAUTION – METAL AND ELECTRICAL PARTS SHOULD NEVER
BE IMMERSED IN WATER.
MOTOR
RECEPTACLE
(BLACK)
BLACK
WHITE
RED
BLACK
SWITCH
BOX
120 VAC
GROUND
LINE IN
FIGURE 7
3
BLACK
LIGHT
WHITE
RECEPTACLE
(WHITE)
GROUND
YELLOW
WHITE
BLACK
RED
BLACK
LIGHT
WHITE
SWITCH
FAN
SWITCH
FIGURE 6
FIGURE 8
Publicidad
